Vacuum Packaging Machines

A vacuum packaging machine removes air from a compatible pouch and heat-seals the opening. DongFeng builds tabletop, floor-standing, double chamber and automatic belt machines for commercial food operations and industrial packing.

Compare seal-bar lengths and machine formats for your filled pouches and target output.

DongFeng DZQ-500 2SA double chamber vacuum packaging machine
DZQ-500 2SA · Double chamber vacuum packer

Tabletop vacuum sealers

Compact machines for small batches, frequent format changes and limited bench space.

Floor-standing single chamber machines

Dedicated batch stations for larger packs or when loading height and chamber clearance matter.

Double chamber vacuum packaging machines

Alternating work areas allow the operator to prepare the next batch while the other chamber runs.

Automatic chamber belt machines

Conveyor-fed machines for repeatable pack formats and production-line transfers.

Commercial and industrial vacuum packaging machine comparison

Choose a commercial vacuum sealer around bench space, pouch changes and one operator’s workload. Choose an industrial vacuum sealer around sustained output, shift length and transfer between production stations.

Machine typeHow packs moveWhat to verify before buying
Tabletop or floor-standing single chamberThe operator loads and unloads the same chamber each cycle.Filled-pouch clearance, usable seal length and packs per cycle.
Double chamberThe operator alternates loading between two work areas.Actual cycle time with the operator, product and pouch you will use.
Automatic chamber beltA belt transfers compatible pouches through the station.Pack spacing, conveyor heights, transfer points and upstream bag loading.

Match the machine to the product

A food vacuum packaging machine has to suit the filled pouch as it reaches the operator, including moisture, sharp edges and uneven shapes.

  • Meat and poultry. Measure the thickest cuts and check pouch protection around exposed bones. For shrink bags, plan the hot-water shrink and surface-drying stages with the vacuum station. Explore meat packaging lines.
  • Seafood and prepared foods. Share product temperature, fill level and how much liquid is free in the pouch. Trial the bag position and vacuum settings on the selected machine.
  • Cheese and dry foods. Check the block or portion size, how the product responds to compression and whether you need to group several pouches in a cycle.
  • Industrial parts. Check pouch puncture resistance and any moisture or contamination requirements for the finished pack.

Size the machine with your actual pouch

Measure the filled bag from end to end, including the open area needed for sealing. Measure the mouth of the bag laid flat and record the tallest point of the product. Ask the supplier to check those dimensions against the usable chamber and sealing length.

Time a full cycle with your product, including loading and unloading. Count the acceptable packs you can produce in that time. For belt machines, measure finished packs at the outfeed with your normal pack spacing.

Estimate batch output

Illustrative calculation for batch machines. Allow separately for changeovers, cleaning and stoppages.

160 packs/hour

Check the sample pack before you order

  • Bag fit. Confirm clearance with the pouch fully loaded. The open end should lie flat on the seal bar.
  • Seal consistency. Use the film you plan to buy and inspect the seals from a run of consecutive packs.
  • Operator access. Measure the working space around the machine and include conveyor heights if you are joining an existing line.
  • Utilities and service. Confirm the voltage, phase, frequency, routine service access and recommended consumables for the quoted configuration.
Equipment documented in the DongFeng cheese factory packaging project

Vacuum packaging large cheese blocks

A South American cheese processor needed to pack large blocks. DongFeng configured a custom double chamber machine with a 200 m³/h vacuum pump, a reinforced chamber and a gas-flush option. The case shows how product dimensions and packaging requirements can change the equipment specification.

Read the cheese factory case study

Prepare your equipment budget

When comparing vacuum packaging equipment, ask for a written quote that identifies the machine, pump and controls, included handling equipment and delivery terms. If you need shrinking, drying or line integration, ask the supplier to itemize those stages.

Commercial cost examples

Review example configurations for commercial operations before requesting a model-specific quote.

Read the commercial cost guide

Vacuum packaging FAQs

Is a vacuum packaging machine the same as a vacuum sealer?

Vacuum packaging machine, vacuum packing machine and vacuum sealer can all refer to equipment that removes air and seals a package. Vacuum sealer also covers household external-suction appliances. For a commercial purchase, confirm the machine type, compatible pouches and the output it can deliver with your product.

How many packs per hour can a vacuum packaging machine run?

For a batch machine, multiply the good packs in one cycle by the number of complete cycles per hour. Include loading and unloading when timing the cycle. For an automatic belt machine, measure acceptable packs at the outfeed over a representative run.

Can one machine handle several pouch sizes?

It can when each filled pouch fits the usable chamber or belt area and its opening lies flat within the usable sealing length. Send your smallest and largest filled samples along with any unusually tall or wide packs.

When do I need a shrink tank or tunnel?

Add a shrink stage when your pack uses a compatible heat-shrink vacuum bag and your process calls for the film to shrink around the product after sealing. If packs must leave the line dry, define the surface-water removal stage in the line specification.

What information does DongFeng need to recommend a model?

Send the product, filled pouch length, width and height, flat bag-mouth width, target packs per hour and installation country. Include your film specification and existing line drawings if you need to integrate the machine.

Get a recommendation for your pack

Share these details with DongFeng so we can narrow down the machine and the options to include in your quote.

  • Product and a photo of the filled pouch
  • Largest filled dimensions and flat bag-mouth width
  • Target packs per hour and current loading method
  • Installation country, available electrical supply and line requirements
Request a vacuum packaging quote